From: Gary Fairfield 
Reply-To: Cavalcade_USA
To: Cavalcade_USA
Date: Tue, 11 Jul 2000

Hey everybody,

 I wanted to send a picture of my setup on the hitch pin.  If anyone is in need of doing something like this, I will send directions. 

It is very simple.  You would need a 5/8" hitch pin lock, (from U-Haul), several washers with a 5/8" center, a piece of galvanized pipe, (6") and the tools are a hacksaw, and files.  Round files, standard rat tail file and a Dremmel tool with a grinding wheel is very helpful.

Gary Fairfield